| Page actions | |
|---|---|
| 1. Page refresh (
) allows you to manually refresh the dashboard 2. Access relevant documentation ( ) |
| Widget, filters and search | Description |
|---|---|
 | Displays the total number of persons in rooms and the total number of available seats. |
 | Displays the average temperature of all rooms with this capability. The temperature sensor has a working range of 0C and 35C (32F to 95F). |
 | Displays the average air quality of all rooms with this capability. The VOC (Volatile Organic Compound) sensor measures indoor air quality based on the presence and amount of gases emitted by, for example, sprays, solvents, smoke, or cosmetics. VOCs are also present in human breath, causing sensors to react to saturated air. The presence of volatile organic compounds can alter productivity and/or health. In most cases, good ventilation can get rid of VOCs. The VOC value represents a general index based on the total sum of these gases, as defined by the Umweltbundesamt Agency (UBA). A period of 72 hours is recommended for the sensor to stabilize in a new location, or after being turned off for an extended period of time. |
 | Displays the average humidity of all rooms with this capability. The humidity sensor reports relative humidity with an operating range between 20% and 90%. The sensor’s accuracy is +/i 10%. |
 | Displays the average ambient noise of all rooms with this capability. The ambient noise level is based on the noise estimate in the stationary noise reduction algorithm that is part of the unit’s acoustic echo canceller. |
 | Displays the average noise of all rooms with this capability. Displays the current noise level in the room. Note that the noise level is only reported when the ambient noise estimation sensor is turned on. |
 | Allows you to search for a system. |
| Reloads the page with its applied filters. | |
Allows you to show only systems based on groupings: Organization, Type of system, Model, Location, Status, Connection. | |
Allows you to filter the systems based on: Firmware, Status, New systems only, Webex-registered systems only, Pexip.me-registered systems, Only system with warnings. |
- Name – Displays the name of the system and its type.
- People – Displays the number of people in the room and the room’s capacity.
- Temperature – Displays the current temperature in the room.
- Air quality – Displays the current air quality in the room.
- Humidity – Displays the current humidity in the room.
- Ambient noise – Displays the current ambient noise in the room.
- Noise – Displays the current noise in the room.
| Option | Description |
|---|---|
| Opens up a diagram with data from the last 7 days. See example below. |
